Lab High Temperature Hot Press Flat Plate Shaping Mold for Conventional Rectangular or Bone-shaped Sample

Schematic diagram of mold operation

Operation steps for mold sample making

Stainless steel flat molds are suitable for thin-film samples. The thickness of the sample can be controlled through the quantitative plate in the middle, and it is convenient to take out the pressed sample without sticking to the hot press.

Mold usage and maintenance

Each time the mold is used, the surface of the mold should be wiped clean with lint-free paper first to prevent the anti-rust oil on the mold from affecting the test results of the sample. When applying pressure, it is necessary to pay attention not to exceed the maximum pressure that the mold can withstand. After using the mold, the samples on the mold should be cleaned in time to prevent corrosion of the mold. When the mold is not used for a long time, anti-rust oil should be applied to the mold and it should be stored in a dry environment.

Technical parameters

1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.