Automatic Cutting Machine for PVC And Nickel Strip Cutting Heat Shrink Tube and Alloy Material Cutter

INTRODUCTION

The cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc.

Tube:  PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.

Cable: Flat cable, copper wire, etc

Tape: nickel strip, hook and loop, cotton tape, elastic band, plastic tape, zipper, conductive tape,foam, etc

Sheet: battory separator, Nickel sheet, diffusersheet, plastic/rubber sheet, pvc sheet,etc

Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper,etc

 

ADVANTAGE

1.High speed: It can cut 100~120 cut per minute. (50mm long)

2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3.Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5.Automatic stopper: It stops automatically if materials run out during operation

6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on

7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.

8.High speed, high accuracy, designed for cutting non-adhesive materials.

SPECIFICATION

Model	Nickel Cutting Machine  YS-100
Source voltage	AC 220V/110V, 50/60HZ, Customized
Power	200W
Warranty	One year limited warranty with lifetime support
Advantages	1 In automatic stop without materials, unattended 2 With a knife or blade adjustment conveniently 3 Automatic grouping and total cumulative count 4 Suitable for all kinds of metal and no-metal strip materials, such as  copper foil,  aluminum foil, copper foil tape, batteries nickel belt and so on
Cutting speed	0-130times/min
Cutting length	0.1mm-10m
Cutting width	0.1-100mm, according to model we choose
Dimension(L*W*H)	360*300*350mm
Weight	About 30kg

PRODUCT IMAGES

1 Standard exported package: Internal anticollision protection, external export wooden box packaging.

2 Shipping by express, by air, by sea according to customers' requirements to find the most suitable way.

3 Responsible for the damage during the shipping process, will change the damage part for you for free.